PRODUCT CATAGORIES
INDUSTRIAL STAND FANS
INDUSTRIAL STAND FANS
INDUSTRIAL STAND FANS
Available in other models and sizes
COMMERCIAL STAND FANS
INDUSTRIAL STAND FANS
INDUSTRIAL STAND FANS
Available in: 18" / 20"
Extractor FANS with SHUTTERS
Extractor FANS with SHUTTERS
Extractor FANS with SHUTTERS
Available in : 8"/ 10"/12"/ 14"/ 16"
EXTRACTOR FANS WITH GRILL
Extractor FANS with SHUTTERS
Extractor FANS with SHUTTERS
Available in : 20" / 24"
EXTRACTOR FANS WITHOUT GRILL
Extractor FANS with SHUTTERS
EXTRACTOR FANS WITHOUT GRILL
Available in: 8"/12"/16"
AXIAL FANS
Commercial Wall Fans
EXTRACTOR FANS WITHOUT GRILL
Available in: 20" / 28" / 38" / 45"
PORTABLE EXHASUST W/ DUCTING
PORTABLE EXHASUST W/ DUCTING
PORTABLE EXHASUST W/ DUCTING
Available in: 12" / 18"
CEILING FANS
PORTABLE EXHASUST W/ DUCTING
MUSHROOM ROOF FAN
Available in other models and sizes
MUSHROOM ROOF FAN
PORTABLE EXHASUST W/ DUCTING
MUSHROOM ROOF FAN
Available in other models and sizes
STAND FANS DFK MODELS
THE WORKHORSE
This Workhorse is Deton's Flagship model, Built to withstand an exceptionally long service life and deliver superior steady performance over extended hours of continuous operation. It packs such a huge displacement of air over such a wide coverage area, the effects of which can be felt within seconds over an impressive distance. It features a Sturdy Wide Round Base, All Steel construction, up to 7 feet in height adjustment, 90 Degrees of Oscillation. Three Powerful Speeds. Superior Dense Safety Grill Guards. Three Streamlined High Velocity Aluminium Blades. Thermal overheat protection, Rust Resistant Coating. Air Displacement volume range of: 13200-18000 m³/h. Best suited for large warehouses, industrial floor areas.
Available in 30"
Features:
- 3 Speeds and 90 Degree Oscillation
- Supplied Fully Assembles or SKD in Shipping Carton with Minimum Assembly required.
- Voltage: 110-120 V / 60 Hz / Single Phase
- Rust Resistant Matt Black Colour
30" INDUSTRIAL STAND FAN (Round Base)
- MODEL: DFK750-T
- SPEED 1: 1200 RPM / 235 CBM/Min / 58 DB / 215W
- SPEED 2: 1400 RPM / 300 CBM/Min / 70 dB / 240W
- SPEED 3: 1600 RPM / 330 CBM/Min / 75 dB / 280 W
STAND FANS DF MODELS
Economical and Powerful
The DF series Industrial Stand Fans offers the same powerful motor features of the DFK series with a more economical stand platform. The DF series offers a less cumbersome but still very sturdy X base for stable support, a slimmer pole and three impella cast aluminium blades which offer increased airflow at reduced sound. The DF series is available in 24" and 26" and 30" Models and all models feature:
- Three Speeds and 90 Degree Oscillation
- Rust Resistant Mat Black Colour
- 110-120V / 60 Hz / Single Phase
- Supplied Fully Assembled or SKD Shipping Carton with Minimum Assemble Required
24" INDUSTRIAL STAND FAN (X-BASE)
- MODEL: DF600-T
- SPEED 1: 1200 RPM / 155 CBM/Min / 52 DB / 155W
- SPEED 2: 1400 RPM / 175 CBM/Min / 56 dB / 175W
- SPEED 3: 1600 RPM / 200 CBM/Min / 62 dB / 200W
26" INDUSTRIAL STAND FAN (X-BASE)
- MODEL: DF650-T
- SPEED 1: 1200 RPM / 165 CBM/Min / 55 DB / 165W
- SPEED 2: 1400 RPM / 190 CBM/Min / 60 dB / 190W
- SPEED 3: 1600 RPM / 245 CBM/Min / 68 dB / 230W
30" INDUSTRIAL STAND FAN (X-BASE)
- MODEL: DF750-T
- SPEED 1: 1200 RPM / 235 CBM/Min / 58 DB / 215W
- SPEED 2: 1400 RPM / 300 CBM/Min / 70 dB / 240W
- SPEED 3: 1600 RPM / 330 CBM/Min / 75 dB / 280 W
34" INDUSTRIAL STAND FAN (X-BASE)
- MODEL: DF850-T
- SPEED 1: 1200 RPM / 235 CBM/Min / 58 DB / 215W
- SPEED 2: 1400 RPM / 300 CBM/Min / 70 dB / 240W
- SPEED 3: 1600 RPM / 330 CBM/Min / 75 dB / 280 W
EXTRACTOR FANS WITH SHUTTERS
MODEL FBD SERIES
DETON EXTRACTOR FANS pack such a huge air displacement capacity that you can cycle through and replace the entire volume of air in any room in minutes. Designed with Free Open & Close Shutters, Stylish and Durably Built with all metal construction and an optimized motor structure, with low temperature rise, energy saving, low noise and engineered for an extremely long service life. Rear grill is optional and removable. All Extractors Fan Models are:
- Coated in rust resistant matt black color
- Supplied as fully assembled units,
- Voltage / Frequency : 110-120V / 60mhz / Single Phase
- Wall Mounting and Electrical installation is required
08" EXTRACTOR FAN WITH SHUTTERS
- MODEL: FBD20-4
- SPEED: 1400 RPM
- CFM: 460
- Power: 35 W
- Noise: 53 dB
- FRAME: 255 X 255 MM
10" EXTRACTOR FAN WITH SHUTTERS
- MODEL: FBD-25-4
- SPEED: 1400 RPM
- CFM: 495
- POWER: 40 W
- NOISE: 55 dB
- FRAME: 285 X 285 MM
12" EXTRACTOR FAN WITH SHUTTERS
- MODEL: FBD30-4
- SPEED: 1600 RPM
- CFM: 640
- POWER: 45 W
- NOISE: 58 dB
- FRAME: 349 X 349 MM
14" EXTRACTOR FAN WITH SHUTTERS
- MODEL: FBD35-4
- SPEED: 1400 RPM
- CFM: 1345
- POWER: 75W
- NOISE: 65 dB
- FRAME: 415 X 415 MM
16" EXTRACTOR FAN WITH SHUTTERS
- MODEL: FBD40-4
- SPEED: 1400 RPM
- CFM: 1695
- POWER: 145W
- NOISE: 67 dB
- FRAME: 438 X 438 MM
EXTRACTOR FANS WITH GRILL GUARD
20" EXTRACTOR FAN WITH GRILL GUARD
- MODEL: FAD50-4
- SPEED: 1600 rpm
- CFM: 3400
- POWER: 350 W
- NOISE: 70 dB
- WALL CUT OUT: 479 X 479 MM
24" EXTRACTOR FAN WITH GRILL GUARD
- MODEL: FAD60-4
- SPEED: 1600 rpm
- CFM: 5120
- POWER: 600 W
- NOISE: 75 dB
- WALL CUT OUT: 542 X 542 MM
EXTRACTOR FANS WITHOUT GRILL
EASY INSTALLATION
DESIGNED FOR AN EASIER INSTALLATION. IDEAL FOR FOOD VENDOR CARTS, KITCHENS AND STOVE HOODS, SURFACE MOUNTED. EASY TO CLEAN AND SEALED MOTOR PROTECTS AGAINST HEAVY GREASE BUILDUP. THEY CAN BE REVERSE MOUNTED IF DESIRED AND ARE EASILY MOUNTED INTO VENTILATION DUCTING AS WELL. THEY OFFER AN IMPRESSIVE AIRFLOW AND A QUIET RUNNING MOTOR. ALL MODELS INCLUDE THESE FEATURES:
- LIGHT WEIGHT STEEL SHEET CONSTRUCTION.
- RUST RESISTANT BLACK COATED COLOUR.
- 110V-120V / 60 Hz / SINGLE PHASE
- FULLY ASSEMBLED OUT OF THE BOX
- REQUIRES MINIMAL MOUNTING OR ELECTRICAL INSTALLATION
08" EXTRACTOR FAN
- MODEL: FAD 20-4
- SPEED: 1400 rpm
- CFM: 460
- POWER: 35 W
- AIR VOLUME: 780 cbm/m
- NOISE: 45 dB
12" EXTRACTOR FAN
- MODEL: FAD 30-4
- SPEED: 1400 rpm
- CFM: 640
- POWER: 45 W
- NOISE: 45 dB
16" EXTRACTOR FAN
- MODEL: FAD 40-4
- SPEED: 1400 rpm
- CFM: 1695
- POWER: 145 W
- NOISE: 45 dB
MODEL GLF SERIES EXTRACTOR FAN
AXIAL EXTRACTOR FAN: MODEL: GLF
THIS EXTRACTOR FAN IS ONE OF THE LARGEST AND MOST POWERFUL EXTRACTOR FAN WE CARRY IN STOCK. CONSTRUCTED WITH ALUMINUM BLADES, A GALVANIZED FRAME AND WIND RESISTANT SHUTTERS THIS FAN IS DESIGNED TO WITHSTAND EXTREME WEATHER CONDITIONS. SUITABLE FOR LARGE INDUSTRIAL FACILITIES, WAREHOUSES IN EXCESS OF 10,000 SQFT, AGRICULTURAL GREENHOUSES, ANIMAL FARMS, AND AUTO PAINT SHOPS OR WHERE EVER HUGE EXTRACTION OR VENTILATION IS NEEDED. IT IS SUPPLIED FACTORY FULLY ASSEMBLED AND IS EASY TO INSTALL. DUST PROOF AND WATER PROOF MOTOR, WITH CHAIN DRIVEN ROTATION OFFERS LOW ENERGY CONSUMPTION AND AN EXTREMELY LONG MOTOR LIFE.
Features:
- Dust Proof and Water Proof Sealed Motor
- Low Noise Level of 60dB
- Chain Drive offers a very low energy consumption
- Air Flow exceeds 32,000 CBM per Minute
- Single Speed Function On/Off
- Power 750 Kw / RPM 450
- Overall Dimension : 1060 x 1060 x 400 mm
20" AXIAL EXTRACTOR FAN
- MODEL: GLF 5
- SPEED: 1400 rpm
- CFM: 4130
- POWER: 750 W
28" AXIAL EXTRACTOR FAN
- MODEL: GLF 7
- SPEED: 960 rpm
- CFM: 8120
- POWER: 750 W
38" AXIAL EXTRACTOR FAN
- MODEL: GLF 9.5
- SPEED: 450 rpm
- CFM: 18830
- POWER: 750 W
45" AXIAL EXTRACTOR FAN
- MODEL: GLF 11.2
- SPEED: 450 rpm
- CFM: 21700
- POWER: 750 W
CYLINDER FANS
MODEL FBD SERIES
DETON CYLINDER FANS are designed to accommodate inside air ducking applications :
The fan adopts specially designed forward curved three-dimensional twisted blade. Low noise, large air flow, high efficiency, and stable air pressure. The fan is powder coated with lasting bright color. The fan with rear grill, front grill is optional. Suitable for ventilation in factories and agricultural plants . Air volume: 1600-30000 m³/h. Total pressure: 65-400 Pa.
- Supplied as fully assembled units,
- Single Speed
- Voltage / Frequency : 110-120V / 60mhz / Single Phase
12" CYLINDER FAN
- MODEL: TAD30-4
- VOLTAGE: 110-120V/60 Hz
- Single Speed : 1400 rpm
- CFM: 640
- POWER: 45 W
- NOISE: 61 dB
- Colour: STEEL BODY / RED BLADES
- Circumference Body: 360 mm
- Circumference Lip : 385mm
- Diameter: 300mm
- Depth: 272mm
16" CYLINDER FAN
- MODEL: TAD30-4
- VOLTAGE: 110-120V/60 Hz
- Single Speed : 1400 rpm
- CFM: 1695
- POWER: 145 W
- NOISE: 68 dB
- Colour: STEEL BODY / RED BLADES
- Circumference Body: 460 mm
- Circumference Lip : 485mm
- Diameter: 400mm
- Depth: 272mm
20" CYLINDER FAN
- VOLTAGE: 110-120V/60 Hz
- Single Speed : 1400 rpm
- CFM: 3400
- POWER: 350 W
- NOISE: 72 dB
- Colour: STEEL BODY / RED BLADES
- Circumference Body: 560 mm
- Circumference Lip : 590mm
- Diameter: 500mm
- Depth: 272mm
- Fully Assembled in Factory Carton
- Warranty 3 Months
Portable Ventilator
PORTABLE EXHASUST W/ DUCTING 5M (PVT)
● The motor adopts cold-rolled silicon steel sheet, copper enameled wire, less than 50K temperature rise design, with excellent overload capacity.
● The motor uses high quality low noise ball bearing to ensure stable operation, and long service life.
● The fan adopts special designed aluminium alloy blade.
● Easy to move, convenient to use.
● Suitable for exhausting gas of the welding workshop, drying the ground after clean and the occasion where the air is not in circulation.
12" PORTABLE EXHAUST
- MODEL: PVT- 30
- CFM: 2012
- VOLTAGE: 110-120V/60 Hz
- Speed: 2800
- POWER: 380 W
- NOISE: 80 dB
18" PORTABLE EXHAUST
- MODEL: PVT- 45
- CFM: 5895
- VOLTAGE: 110-120V/60 Hz
- Speed: 2800
- POWER: 1800 W
- NOISE: 95 dB
INDUSTRIAL WALL MOUNTED
A Compact Wall Fan With Serious Punch
Ideal for warehouses, factories, and large workshops and very popular in churches and religious halls or indoor areas where large groups gather, this wall fan provides a powerful stream of air with low noise. The DF models offer a huge displacement of air in 3 speeds. With versatile and solid wall mount and bracket which can be fixed on any surface or columns to offer even more oscillating options. ventilates large work areas with ease. The DF Models are designed for heavy workloads and can run continuously for over 5000 working hours without failure. Under normal operating workloads it will offer an impressively long service life. Other feature include:
- 3 Speeds and 90 Degree Oscillation 3 High Velocity Cast Aluminum Blades.
- Rust Resistant Matt Black Coating
- Supplied Fully Assembled or SKD factory pack with minimum Assemble Required
- Voltage : 110V-120V 60Hz / Single Phase.
20" INDUSTRIAL WALL FAN
- MODEL: DF500-TW
- SPEED 1: 1100 RPM / 105 CBM/M / 48 DB / 110W
- SPEED 2: 1250 RPM / 128 CBM/M / 50 dB / 125W
- SPEED 3: 1400 RPM / 145 CBM/M / 62 dB / 155W
24" INDUSTRIAL WALL FAN
- MODEL: DF600-TW
- SPEED 1: 1100 RPM / 125 CBM/M / 52 dB / 120W
- SPEED 2: 1250 RPM / 150 CBM/M / 56 dB / 130W
- SPEED 3: 1400 RPM / 195 CBM/M / 62 dB / 170W
30" INDUSTRIAL WALL FAN
- MODEL: DF750-TW
- SPEED 1: 1100 RPM / 214 CBM/M / 58 DB / 175W
- SPEED 2: 1250 RPM / 270 CBM/M / 70 dB / 195W
- SPEED 3: 1400 RPM / 302 CBM/M / 75 dB / 240W
34" INDUSTRIAL WALL FAN
- MODEL: DF850-TW
- SPEED 1: 1100 RPM / 214 CBM/M / 58 DB / 175W
- SPEED 2: 1250 RPM / 270 CBM/M / 70 dB / 195W
- SPEED 3: 1400 RPM / 302 CBM/M / 75 dB / 240W
DOMESTIC STANDING fan
THE LAST STANDING FAN YOU WILL EVER NEED TO BUY
No other Domestic Stand Fan on the market can match all the features offered in this fan, Constructed of all Steel Components it offers extreme durability, and a service life longer than any other fan in its class, its large metal base offers the security from tipping over, and its well designed grill offers maximum safety with minimal airflow loss, Streamlined aluminum Blades provide a high velocity air flow with low noise output and the motor is packed rich with all the engineering features of the larger industrial models, such as industrial strength steel gears, silicone rolled copper enameled wiring, controlled motor temperature rise, and thermal protection that offers a safe running over extensive operating hours. The motor comes out of the box ready for 5000 hours of continuous failure free running.
18" STAND FAN: MODEL 45T-S
- Speed 1 : 1050 rpm / 78 Cbm/Min / 48 dB / 55 W
- Speed 2 : 1250 rpm / 98 Cbm /Min / 50 dB / 60 W
- Speed 3: 1400 rpm / 115 Cbm/Min / 55 dB / 75 W
- Adjustable Height to 160cm
- Adjustable Pitch Angle
- Oscillating to 160 Degrees
- Colour : Black and Steel
20" STAND FAN: MODEL 50T-S
- Speed 1 : 1050 rpm / 120 Cbm/Min / 48 dB / 80 W
- Speed 2 : 1250 rpm / 150 Cbm /Min / 50 dB / 90W
- Speed 3: 1400 rpm / 190 Cbm/Min / 55 dB / 110W
- Adjustable Height to 160cm
- Adjustable Pitch Angle
- Oscillating to 160 Degrees
- Colour : Black and Steel
COMMERCIAL WALL MOUNTED
Far More Powerful Than Conventional Wall Fans
Built with the strength of an Industrial Fan but designed for commercial and residential use, this is one of the most durable wall fans you can find. Far superior to conventional plastic body fans, this fan offers you exceptional performance and a long service life. Features include
- Streamline blade, low noise, large air volume, and soft air supply.
- Adjustable angle of pitch, large wind coverage area.
- Three powerful speeds, 90 Degree oscillation angle adjustable.
- Comes Fully Assembled, Easy to Install and Easier To Use
- Modern appearance, elegant color, and excellent craft.
- Oscillation controlled by micro-motor, with metal base, durable.
- Motor over-heating protection for long service life.
- Ideal choice for cooling in families meeting rooms, restaurants, large offices, hotels lobbies, churches, temples, and stores.
- All Metal Construction, No Plastic Components
18" COMMERCIAL WALL FAN
- MODEL: 45T-W
- Speed 1 : 950 rpm / 60 Watts / 57 CBM/Min / 48dB
- Speed 2 : 1250 rpm / 70 Watts / 69 CBM/Min / 50dB
- Speed 3: 1400 rpm / 90 Watts / 84 CBM/Min / 55dB
20" COMMERCIAL WALL FAN
- MODEL: 50T-W
- Speed 1 : 950 rpm / 87 Watts / 65 CBM/Min / 50dB
- Speed 2 : 1250 rpm / 95 Watts / 78 CBM/Min / 53dB
- Speed 3: 1400 rpm / 120 Watts / 96 CBM/Min / 58dB
MUSHROOM ROOF FAN
Suitable for installation on the roof of industrial and mining plants, civil buildings, shopping malls and other places for the purpose of extraction and exhaust. Upper exhaust type centrifugal roof fan which adopts backward centrifugal aluminum impeller and aluminum fan casing. Fan cover and outer housing: Made thick aluminum plate, which can withstand external strength and large wind load. Drive mechanism support plate is made of anti-corrosion galvanized steel plate. The flashing and the air inlet are integrated and stretched to prevent water seepage. Anti-rust bird-proof net
RCF-355C
- CFM: 1700
- SPEED: 1350
- DIMENSIONS: L 740 X W 630 X H 695
- POWER: 370 W
RCF-400 C
- CFM: 2000
- SPEED: 1100
- DIMENSIONS: L 835 X W 712 X H 736
- POWER: 370 W
RCF-450 C
- CFM: 3317
- SPEED: 1300
- DIMENSIONS: L 835 X W 712 X H 884
- POWER: 1100 W
DRUM FAN
PORTABLE AND POWERFUL
These Monster sized fans can cool a large floor area with extreme ease, they push up to 32,500 cubic meters of air per hour, the largest volume of air for any fan of their size. Excellent for cooling outdoor function, or densely crowded party events on a hot day. Works very well for ventilating crowded and humid indoor areas with low ceilings and it also works great for heat extraction in workshop areas. Built in thermal protection allows you to safely operate it for long hours. Wheels and handle allow for easy maneuverability with just a tilt and pull. Equip with well designed wide blades fitted at an angle and pitch to provide higher wind velocity with significantly reduced wind noise and an industrial grill guards that offers maximum protection. Supplied fully assembled out of the factory carton.
36" DRUM FAN: MODEL # HVF-90E
Speed 1 : 850 RPM / 350 CBM/Min / 65 dB / 520 W
Speed 2 : 1050 RPM / 460 CBM /Min / 75 dB / 650 W
Voltage: 110-120V / 60 Mhz / Grounded Flat Pin Plug
Dimensions: 1060/480/980/1040 mm
Weight : 35.00 KG
Colours : YELLOW
42" DRUM FAN: MODEL # HVF-105E
Speed 1 : 850 rpm / 410 Cbm/Min / 65 dB / 620 W
Speed 2 : 1050 rpm / 540 Cbm /Min / 75 dB / 750 W
Voltage: 110-120V / 60Hz / Grounded Flat Pin Plug
Dimensions: 1230/480/1120/1160 mm
Weight: 38.50 KG
Colour : Rust Resistant Yellow
30" MOBILE FLOOR FAN
Ideal for Commercial Areas
The same performance you get from an industrial powered stand fan but in a floor model. Without the weight of the heavy floor base of the standing models this model is lighter and easy to carry or relocate. Relatively quiet running this fan is great for large gymnasiums, assembly halls, and is enjoyed in hospital wards as well, With three operations speeds, and a full 30" triple blade protected by an industrial styled safety grill this fan is well enjoyed in homes and hospital wards as well.
30" MOBILE FLOOR FAN: MODEL FF75M
- Speed 1 : 850 RPM / 214 CBM/Min / 58 dB / 215 W
- Speed 2 : 950 RPM / 270 CBM/Min / 67 dB / 240 W
- Speed 3 : 1100 RPM / 302 CBM/Min / 68 dB / 280 W
- Colour : Chrome Black frame